Bergeon 5504-110 Vacuum Dust Extraction System.

Individual working station (optional for 2 watchmakers).

This is the ultimate vacuum dust extraction complete system and needs no additional equipment. Safely remove dust and small particles from the face of the watch dial. Remove dust and small particles from the interior of the watch case. Clean your work area after removing a damaged glass. The uses are endless! If the station is to be used by two watchmakers simultaneously then there are several items that need to be purchased.

Composition:

• Motor capacity 2,8 m 3 /h. 
• 110 Volt Motor
• Vacuum 20 mbar
• 1 Inlet Filter 
• 1 Foot switch
• 1 Stand VA3 for Stylus, with holding device 
• 1 bottle with special oil for the motor
• 3 m. plastic tubing, exterior Ø 10 mm, interior Ø 6 mm
• 1 Vacuum Stylus VA1 
• 1 Brush VA14, soft, white 
• 1 Brush VA15, blue, coarse

Servicing of the unit could not be simpler:

After the first 100hrs of working completely drain the motor and re-fill with new oil. This process should be repeated after every 800hrs of work thereafter. 

This dust extractor can be used by two watchmakers, working side by side. The switches can then be used alternately.

This is a 'Special Order' item and will take 15-20 days from date of order. 

Bergeon No. 5504-110